Step Four - Front End Wiring

Had left a few inches of wire wrapped about the mount for the 'umbilical cable' that connects
the brake, turn and running lights of RoadAbode to the wiring added to RoadToad.

The connector above had to be opened up and wired on. Only made 2 mistakes - Forgot that after opening up the connector that the outer 'sleeve' has to be slid over the wires first, and after I had took the connector off again, to redo this - I backed out one of the set screws - and spent an extra 5 minutes trying to feed it back into its hole. Finally got everything together and mounted. Well, Road Toad is wired now - need to get the wiring from RoadAbode to match (She currently has a 7 blade connector, which I will wire in the round 4 prong to match RoadToad)
next on RoadToad, the Supplemental Brake System - "EvenBrake"